Nt1330 Unit 2

As a child we sung, “ Somewhere in the ancient, mystic trinity. You get three as a magic number. The past and the present and the future. Give you three as a magic number.”

This section discusses the results are obtained from Matlab/Simulink software. The simulation consequences are obtained in two scenarios with taking in account the variation of wind generation. The first scenario examines the test system with SSSC, set on Line 1 and between the buses 1 and 2, but without power oscillation damping (POD) role. This exam is conducted through applying three-phase fault at midpoint of Line 2. The fault is applied at 1.33 second and it takes 10 cycles to clear the fault by the two breakers at the end of Line 2.

7.4.1.1 Dielectric withstanding voltage The purpose of this test is to prove that a connector can operate safely at its rated voltage and will be able to withstand momentary over potentials due to switching, surges and other similar phenomena. The applied voltage can be either AC or DC. The voltage should be applied across the two closely spaced contacts as well as between a connector shell and the contacts closest to the shell. The test voltage in the case of coaxial connectors shall be applied between the inner and outer conductor. The voltage should be ramped up uniformly from zero to rated value.

Perhaps many are confused about the existing commands linux, this time I will discuss about the linux basic commands used along with examples of its use. 1: Seeing identification (id and group id number) $ Id 2: Looking the calendar date of the system a. Looking at the current date $ Date b. See calendar $ Cal 9 2002 $ Cal -y 3: Seeing the machine identity $ Hostname

4. OpenVPN—Open VPN is open source and it uses other ope-source technologies like SSL v3/TLSv1 and OpenSSL encryption library protocols. It is not port specific and can be configured on any port. This feature enables OpenSSL VPN traffic indistinguishable from other HTTPS traffic and not easily gets blocked. AES encryption makes it more secure than blowfish encryption.

\subsection{Creation of Matching Entries ({\it MakeMatchingEntries'})} \label{sec:make-matching} \label{sec:match} Procedure ${\it MakeMatchingEntries'}$ takes a decoding entry set and a pattern as input and outputs a newly created set that contains the entries that match the input pattern. Note that not every entry in the newly created set is the same entry in the input entries because the exclusion conditions were modified. The exclusion conditions that are invalidated by the input pattern are removed from the exclusion condition set of output entries. In addition, when all the matching patterns are invalidated, the unmatching patterns are expanded to their opcode patterns. Procedure ${\it MakeMatchingEntries'}$ consists of the following

Information Assurance Lab5: Introduction to Metasploit on Kali Linux Anti-Black Hats 1) Booting Kali Linux and starting Metasploit: 1d.) Why is it usually a bad idea to operate in the Linux environment as root? If you are unfamiliar with the concept of the root user, do a quick google search Answer: Root User: In Unix-like computer OSes, root is the conventional name of the user who has all rights or permissions (to all files and programs) in all modes (single- or multi-user. The root user can do many things an ordinary user cannot, such as changing the ownership of files and binding to network ports numbered below 1024.

Rainbow table: It is a pre computed table for reversing cryptographic hash functions, usually for cracking password hashes. Tables are usually used in recovering a plaintext password up to a certain length consisting of a limited set of characters. Ransaomware: The system that doesn’t allows users to proceed until the payment is done is generally known as Ransaomware. RAT programmes: RAT stands for ¨Remote Administrative Tool¨, it is a malware software, that allows a remote operator to control a system.

The first domain for this test battery is Memory. It has 4 subtests within it. They are Episodic memory, working memory, semantic memory and delayed storytelling. A total score of 100 for this domain. Episodic memory:

Back side of the system unit: * Serial port: it is a general-purpose interface that can be used for almost any type of device, including modems, mouse or keyboard. * Parallel port: It is usually used for connecting PC to a printer. * USB port: It is a plug and play port on your pc. With USB, a new device can be added to your computer without additional hardware or even having to turn the PC off. A single usb can be used to connect to 127 peripheral devices.

In semi-structured P2P network, the super-peers manage and organise the reputation values of their peers for resource selection and enhancing the result merging results. The reputation values of peers, however, are calculated by aggregating its documents ' reputation values. Technically, the super-peers build a 2-tuple of peer and documents reputation vector as esizebox{0.27 extwidth}{!}{$(P_{i}, (Rep(d_{1}), Rep(d_{2}), ..., Rep(d_{n})))$} where $P_{i}$ is peer $i$ belong to super-peer $S_{j}$ and $Rep(d_{k})$ refers to the document reputation value as calculated in Equation ef{Reputation_documents}. The peer 's reputation value is aggregated from other users ' feedbacks on its documents as in Equation ef{RepPeer}. egin{equation} Rep(P_{j})

35. Do we run anti-virus software on servers on all Microsoft platforms? 36. Is dial-in access into the system/network is controlled by authentication and logs?

1. List and explain the top 5 factors that are required, at a bare minimum, to make an application secure. Security architecture, authentication, session management, access control, and input validation are the top five factors that make an application secure. Security architecture: OWASP verification requirements in security architecture verify all the application components and libraries that are present in the application are identified. A high level architecture of an application must be designed.

From the design specifications, we know that Q = 0 if DG = 01 and Q = 1 if DG = 11 because D must be equal to Q when G = 1. We assign these conditions to states a and b. When G goes to 0, the output depends on the last value of D. Thus, if the transition of DG is from 01 to 10, the Q must remain 0 because D is 0 at the time of the transition from 1 to 0 in G. If the transition of DG is from 11 to 10 to 00, then Q must remain 1.

(Inventory Replenishment Features, par. 1) Automated inventory management systems can facilitate business owners generate resilient internal inventory controls. Placing security tags on products to reduce theft or misuse was allowed by the business technology. Small businesses also can use electronic data interchange (EDI) to place electronic inventory reorders. EDI also helps small businesses avoid stock outs that can result in fewer consumer sales.