Nt1310 Unit 3 Assessment Tools

Assign. 3 Andrew McConnon 13349871 1. In terms of specification of the framing in relation to the classic Ethernet protocol, it is specified by IEEE 802.3-2012.

SOF – The single dominant start of frame bit marks the start of a message, and is used to synchronize the nodes on a bus after being idle. Identifier-The Standard CAN 11-bit identifier establishes the priority of the message. Lower the value of identifier, its priority will be higher. RTR – The single remote transmission request (RTR) bit is used by the sender to inform receivers of the frame type.

Figure (2): (a) Original Image of Copter, (b) resulting image after basic histogram equalization of Copter, (c) comparison of original histogram (dark blue) versus equalized histogram (light blue) [1] 3.2-Histogram Mapping It is more generalized than histogram equalization that allow us to change data that allow us get the resulting histogram matches some curve they call mapping sometimes histogram matching. The most common implementation of histogram mapping depending on three steps: 1) equalizing the original image, 2) histogram equalize the desired output image, 3) and apply the inverse of the second transformation to the original equalized image. nA T1 = FA (nA ) = ∫ pA

Jason, I will address each of your points below: 1-4: I am positive the system and scenes are 100% functional. I have tested several times, most recently with the Lutron programmer about 2 weeks ago, and everything worked. Last night, I tested the scenes again and confirmed the lighting worked by looking at the front door camera. Regardless, I am headed over shortly to confirm, again. My guess is Ms. Mathews is not fully aware of the functionality of the system.

$A$ is a set of conditions $C_{i,L_j},{i,j}inmathbb{N}$ at the same hierarchical level $L_j$. Only one condition $Cin A$ can be extit{true} at the same time and no state transition without being specified by a condition is possible. If condition $C_{i,L_j}$ is not extit{true} any more (due to the proceeding of the assembly operation), there is a fallback to state $S_{j,L_i}$ and all conditions are evaluated to determine the current substate. An exemplary decomposition tree containing different hierarchical levels, multiple states per level and conditions for state transition is given by Fig.~

4. Strong collision: given a message M1, it is not possible to find two distinct messages such that h (M1’) = h (M1). The probability of this collision is 2n/2.

1. 1. Data scrubbing is which of the following? A. A process to reject data from the data warehouse and to create the necessary indexes B.

Question 1: We learned that when calling subprograms or functions that we can pass data to the subprogram or function by ‘value’ or by ‘reference’. Describe what each approach is, how it works and what the potential security disadvantage is when passing parameters by reference. An easy way to view the difference between pass by value and pass by reference is to use the explanation on (Stack Overflow, 2008). This is a great way to visualize the difference as well as the potential security issues. "Say I want to share a web page with you.

OUR COMPANY has recently expanded its infrastructure and now needs to ensure that authorized employees are able to access the intranet. We have many of our staff frequently traveling to remote locations, which means they need access to company documents stored on our intranet file server. By enabling our employees to access company information remotely, we need to ensure that this data is secure and that not just anyone is remotely accessing company resources. As such I think now would be a good time to talk about the various protocols we could use to help us achieve this. THE FIRST OF THESE PROTOCOLS IS L2TP which stands for layer two tunneling protocol.

\section{Building Blocks} \subsection{Access Structures} \textbf{Definition 3.8.}(Access Structure\citeup{beimel1996secure}) \emph{Let $\{P_1, P_2,...,P_n\}$ be a set of parties. A collection $\mathbb{A}\subseteq 2^{\{P_1,P_2,...,P_n\}}$ is monotone if $B\in\mathbb{A}$ and $B\subseteq C$ implies $C\in\mathbb{A}$. An access structure is a monotone collection $\mathbb{A}$ of non-empty subsets of $\{P_1,P_2,...,P_n\}$, i.e., $\mathbb{A}\subseteq 2^{\{P_1,P_2,...,P_n\}} \setminus\{\emptyset\}$. The sets in $\mathbb{A}$ are called the authorized sets, and the sets not in $\mathbb{A}$ are called the unauthorized sets}. In our settings, attributes will play the role of the parties such that the access structure $\mathbb{A}$ will contain the authorized

Everyone please read the instructions to all assignments to make sure I outlined all the potions correctly. You are not only responsible for your own portion, but for everyone else’s as well. I sometimes find Walden’s instructions to be quite difficult, so to make sure that I understood them correctly I would like everyone to go over them and correct any mistakes and/or typos I may have made. Professor Bissonette pointed out that I outlined root cause as a plural (root causes) whereas it should be a single root cause. That one S at the end of “cause” could have affected our entire project.

1. Are you happy with what you produced on this assessment? Explain why you are or are not. I am not happy with my current test grade because it doesn't reflect the amount of work I put into reviewing for this test. I’ve put more reviewing time for this math assessment than any other math test I’ve ever taken.

Investigating For my Personal Project topic, I chose to create a website or a mobile application for iOS by coding. I chose this in hope of successfully creating a social media website/app where students could enter their service activities and have fun doing it. They would be able to see what their friends have done as well as being able to post and sign up for new service activities. Administration could also use this as a record for points/hours (depending on the school). I would call this website/application ObServe.

Assessment Planning Social worker conduct bio-psycho-sociocultural-spiritual assessments to gather information regarding all of the different dimensions of a client. This will allow the social worker to examine every factor that may or may not be contributing to the presenting problem the client is being treated for. For the purpose of this assignment, I will use the provided case study “Peter” as if I were conducting a bio-psycho-sociocultural-spiritual assessment.

When first contacting a client, overview assessments like MOHO screening tools and Assessment of Occupational functioning are applied that covered to major components of the model. After identifying specific problem areas, more information and performance evaluation may be needed to prepare interventions. Therapists do this by applying checklist evaluation like the Interest Checklist and the Occupational Questionnaires, and observational evaluations like assessments of communication skills, assessments of motor and process skills, as well as Volitional Questionnaire and Paediatric Volitional Questionnaire. There are also specific practice evaluations like the Work Environment Impact Scale and the School Setting Interview. With enough information of the client, therapists can plan interventions for the client and further performance